مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101Performance of Submerged Aerated Biofilters for Wastewater Treatment and Excess Biological Sludge Productionعملکرد فیلترهای هوادهی شده مستغرق در تصفیة فاضلاب و تولید لجن مازاد بیولوژیکی2142201FAمحمدعلی بقاء پوردانشجوی دکترای عمران، مهندسی آب ومحیط زیست، دانشگاه علم و صنعت ایرانابراهیم جباریاستادیار دانشکده عمران، دانشگاه علم و صنعت ایرانJournal Article20060117Minimizing sludge production in the treatment facility is a reasonable measure to reduce waste in sewage treatment, especially as regards excess biological sludge. In this regard, submerged aerated filters' (SAFs) have recently found increasing applications in treatment facilities. Thanks to their treatment mechanism, they have greatly contributed to reduction of waste production and, thereby, to reduced treatment costs. Biomass growths of both attached and suspended types take place in these filters. However, little attention has been paid to suspended sludge production and to its relationship with the physical properties of the filter. The design and application criterion for these filters is the organic loadings on unit of area or unit of volume of the media used in these filters. In this study, four filters with different physical properties and different specific areas were loaded with synthetic wastewater made of low-fat dry milk powder for five different hydraulic retention times to evaluate excess sludge production rates in submerged aerated filters. It was shown that increasing specific area increased SCOD removal efficiency up to a maximum level in saturated growths after which point the removal efficiency remained unchanging or decreased. The results also revealed that decreased hydraulic retention times increased sludge production rates in all the study columns and that media with higher porosity levels produced less excess sludge despite lower pollutant removal efficiency.به منظور تولید زائدات کمتر در فرآیند تصفیة فاضلاب و به خصوص کاهش لجن مازاد، منطقی است که نرخ تولید این لجن در محل تصفیه به حداقل رسانده شود. در این رابطه استفاده از فیلترهای هوادهی شده مستغرق در تصفیة فاضلاب کاربرد روزافزونی پیدا کرده است و طی سالهای اخیر فیلترهای مذکور به سبب ماهیت روش تصفیهشان کمک بسزایی در کاهش زائدات و متعاقب آن پایین آوردن هزینهها نمودهاند. در این فیلترها رشد تودة بیولوژیکی نه تنها به صورت چسبیده بلکه به صورت معلّق نیز انجام میگیرد، اما نرخ تولید لجن معلق و ارتباط آن با مشخصات فیزیکی فیلتر کمتر مورد توجه قرار گرفته است. در هر حال ملاک طراحی و به کارگیری فیلترهای مزبور میزان بارگذاری آلی بر واحد سطح یا واحد حجم محیط به کار رفته در آنهاست . در این مطالعه به منظور ارزیابی نرخ تولید لجن اضافی در این گونه فیلترها، چهار فیلتر با مشخصات فیزیکی و سطوح مخصوص مختلف با فاضلابی مصنوعی بر پایة پودر شیر خشک کم چربی، در زمانهای ماند هیدرولیکی متفاوت مورد بارگذاری قرار گرفتهاند. در این مطالعه نشان داده شده که افزایش سطح مخصوص فیلترها در ابتدا سبب افزایش کارآیی فیلتر شده و پس از آن قدرت فیلتر ثابت مانده و یا کاهش مییابد. نتایج نشان دادند که در کلیة فیلترها نرخ تولید لجن مازاد با کاهش زمان ماند هیدرولیکی افزایش یافته و در محیطی با تخلخل بالاتر با وجود پایین بودن کارآیی در حذف آلایندة محلول، زائدات کمتری تولید نموده است.مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101Evaluation of Metallic Iron (Feo) Application to Remediate Nitrate-Contaminated Waterارزیابی کاربرد آهن عنصری در پاکسازی آبهای آلوده به نیترات15212222FAمهناز نیکآییناستادیار گروه مهندسی بهداشت محیط، دانشگاه علوم پزشکی اصفهانسیمین ناصریاستاد گروه مهندسی بهداشت محیط، دانشگاه علوم پزشکی تهرانJournal Article20060804Batch experiments were carried out to study chemical reduction of nitrate by metallic iron (Fe<sup>0</sup>) as a potential technology to remediate nitrate-contaminated water. The effects of different operating conditions such as initial pH of the solution, nitrate concentration, and Fe<sup>0</sup> dosage on both nitrate reduction and removal efficiency were investigated. The results showed that the initial pH of the solution was very effective on nitrate removal which was over 95% within two hours at pH=2. However, nitrate removal decreased with increasing pH. Thus, only 18.2% of nitrate was removed at pH=5. It was also found that the ratio of iron to nitrate was important in nitrate removal, and a ratio of 400gFe<sup>0</sup>/gNO<sub>3</sub><sup>-</sup> had the best efficiency for nitrate removal. The feasibility of using industrial wastes such as iron filings was also studied and it was found that the wastes could be desirable for nitrate removal.در این تحقیق کاهش شیمیایی نیترات توسط آهن عنصری (Fe<sup>0</sup>) به عنوان روشی بالقوه جهت پاکسازی آبهای آلوده به نیترات مورد مطالعه قرار گرفت و تأثیر پارامترهای مختلف شامل pH اولیه محلول، غلظت نیترات و مقدار آهن مصرفی، بر میزان و درصد حذف نیترات بررسی گردید. با تغییر pH مشخص گردید که pH اولیه محلول در دستیابی به حداکثر میزان حذف بسیار مؤثر است و در pH برابر 2 در دو ساعت اولیه حذف نیترات بیش از 95 درصد بوده است. با افزایش pH ، از میزان حذف کاسته میشود به نحوی که در pH برابر 5، تنها 18/2 درصد حذف نیترات حاصل گردید. این مطالعه همچنین نشان داد که نسبت آهن به نیترات از عوامل مهم دیگر در میزان حذف میباشد و با میزان 400gFe<sup>0</sup>/g میتوان به بهترین کارآیی دست یافت. امکان کاربرد ضایعات صنعتی، مانند برادههای آهن نیز بررسی شد و مشخص گردید که کارآیی این ضایعات در حذف نیترات، مطلوب میباشد.مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101Evaluating the Performance of Reverse Osmosis in Arsenic Removal from Waterارزیابی عملکرد فرآیند اسمز معکوس در حذف آرسنیک از آب22282223FAکریم مظفریانکارشناس ارشد مهندسی شیمی، دانشگاه سیستان و بلوچستان، زاهدانسید سیاوش مدائنیعضو هیئت علمی گروه مهندسی شیمی، دانشگاه رازی کرمانشاهمحمد خشنودیعضو هیئت علمی گروه مهندسی شیمی، دانشگاه سیستان و بلوچستان، زاهدانJournal Article20060606Arsenic exists in compounds present in the Earth's crust in various concentrations. High concentrations of arsenic in drinking water may cause skin and lung cancers or other diseases. Unfortunately, in some urban and rural areas inKurdistanProvince(e.g., Delbaran), arsenic concentrations of above 70 ppb are observed in groundwater resources, which is higher than EPA standards. The objective of this study was to evaluate the effects of using membranes for arsenic removal from drinking water. To study the practical effects of different membranes on arsenic removal, five types of membranes, namely, PVD, TFC-SR, FT30, TFC-ULP, and BW30, were used. Based on the two parameters of effluent flux and arsenic removal efficiency (which was above %95), TFC-SR was selected as the best membrane. Atmospheric pressure, temperature, and pH were the parameters tested for this membrane to obtain an optimum atmospheric pressure of 10 bars and an optimum pH level of 7.57. Results also showed that higher temperatures increased both the effluent flux and arsenic removal.آرسنیک عنصری است که در ترکیبات پوسته زمین وجود دارد و غلظتهای زیاد آن در آب آشامیدنی میتواند سبب سرطان پوست ،ریه و دیگر بیماریها شود. متأسفانه بعضی از مناطق روستایی و شهری استان کردستان از جمله شهر دلبران دارای آرسنیک بالاتر ازppb 70 میباشد که بالاتر از حد استاندارد جهانی است. هدف از این تحقیق ارزیابی اثر استفاده از غشاءها جهت حذف آرسنیک از آب بوده است. بنابراین برای بررسی عملی تأثیر غشاءها در حذف آرسنیک، از پنج نوع غشاء به نامهای PVD , TFC-SR ، FT30 ،TFC-ULP و BW30 استفاده شد که غشای TFC-SR با توجه به دو پارامتر شار خروجی و درصد حذف آرسنیک آن که بالای 95 درصد بود، به عنوان بهترین غشاء انتخاب شد. پارامترهای فشار ، دما و pH بر روی این غشاء آزمایش شد و شرایط بهینه فشار برابر 10 بار و pH برابر 7/75 به دست آمد. در ضمن مشخص شد با بالا رفتن دما، شار خروجی غشاء و پسدهی آرسنیک افزایش مییابد.مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101Evaluation of Different Software Packages in Flow Modeling under Bridge Structuresارزیابی کارآیی بستههای نرمافزاری مختلف در شبیهسازی جریان در زیر پلها29402224FAمحمدتقی دستورانیاستادیار، دانشکده منابع طبیعی، دانشگاه یزدJournal Article20050907This study is an independent and a comparative research concerning the accuracy, capability and suitability of three well-known packages ofISIS, MIKE11 and HEC-RAS as hydraulic river modeling software packages for modeling the flow through bridges. The research project was designed to assess the ability of each software package to model the flow through bridge structures. It was carried out using the data taken from experiments completed by a 22-meter laboratory flume at theUniversityofBirmingham. The flume has a compound cross section containing a main channel and two flood plains on either side. For this study a smooth main channel and a smooth floodplain have been assumed. Two types of bridges are modeled in this research; a multiple opening semi-circular arch bridge and a single opening straight deck bridge. For each bridge, two different simulations were carried out using two different upstream boundaries as low flow and high flow simulations. According to the results, all three packages were able to model arch and US BPR bridges but in some cases they presented different results. The highest water elevation upstream the bridge (maximum afflux) was the main parameter to be compared to the measured values.ISISand HEC-RAS (especially HEC-RAS) seem to be more efficient to model arch bridge. However, in some cases, MIKE 11 produced considerably higher results than those of the other two packages. To model USBPR bridge, all three packages produced reasonable results. However, the results by HEC-RAS are the best when the outputs are compared to the experimental data.این تحقیق در حقیقت یک بررسی مقایسهای و مستقل در رابطه با تناسب و توانایی سه نرمافزار هیدرولیکی شناخته شدهMIKE11 ، HEC-RAS و ISIS جهت شبیهسازی جریان در زیر سازه پلها است. دادههای مورد استفاده در این مطالعه مربوط به یک بررسی آزمایشگاهی است که قبلاً با استفاده از یک فلوم 22 متری در دانشگاه بیرمنگهام انگلستان انجام شده است. دو نوع پل، شبیهسازی شد که یکی پل قوسی دو دهانه و دیگری پل مستقیم عرشهدار یا پل مدل US BPR با سه پایه بود. در شبیهسازی هر پل، دو جریان متفاوت تحت عنوان دبی کم و دبی زیاد مورد ارزیابی قرار گرفت و نتایج حاصل از نرم افزارها مقایسه و تجزیه و تحلیل گردیدند. جهت ارزیابی توانایی نرمافزارها نیمرخ سطح آب محاسبه شده توسط این نرمافزارها با مقادیر اندازهگیری شده مورد مقایسه قرار گرفت. هرچند هر دو نرمافزار قادر بودند که جریان در زیر پلهای قوسی و مستقیم عرشهدار را شبیهسازی کنند، لکن نتایج ارائه شده توسط آنها متفاوت بود. جهت شبیهسازی جریان در زیر پل قوسی، دو نرمافزار HEC-RAS و ISIS (خصوصاً HEC-RAS) توانایی و دقت بیشتری را نشان داد لکن نتایج حاصل از MIKE11 در این مرحله فاصله زیادی با نتایج آزمایشگاهی داشت. در رابطه با شبیهسازی جریان در زیر پل مستقیم عرشهدار، هر سه نرم افزار نتایج معقولی ارائه دادند؛ هر چند که نتایج حاصل از HEC-RAS در مقایسه با دو نرم افزار دیگر به مقادیر آزمایشگاهی نزدیکتر بود.مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101Optimum Design and Operation of Cyclic Storage Systems; Lumped Approachطراحی و بهرهبرداری بهینه از سیستم ذخیره سیکلی تودهای41542248FAلیلا استاد رحیمیکارشناس ارشد مهندسی مدیریت منابع آب، دانشگاه صنعتی امیرکبیرعبداله اردشیراستادیار دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیرعباس افشاراستاد دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران0000-0001-8891-3426Journal Article20060701Conjunctive use of surface and groundwater resources is a preferred approach in water resources management. Compared to dam construction, groundwater has certain advantages, among which are less costs, less sedimentation and evaporation, fewer water quality problems, and less social and cultural problems. To reduce the major problems associated with the development of large-scale surface impoundment systems, cyclic storage systems can be used as an alternative. A cyclic storage system (CYCS) is an integrated interactive system consisting of two subsystems of surface water storage (reservoir) and groundwater; this system together with artificial recharge is able to satisfy the predefined demands with rather high reliability. In order to optimize these systems, one must consider the hydraulic interactions between all the components, but unfortunately it has been neglected in many studies. In this article, a nonlinear optimization model for design and operation of cyclic storage systems has been developed using the lumped approach. In order to evaluate the model, its results have been compared with the results of a model in which distributed approach had been deployed, and so the efficiency of lumped models to solve the problems of cyclic storage systems has been investigated<em>.</em>بهرهبرداری تلفیقی از آبهای سطحی و زیرزمینی، رویکردی برتر در مدیریت منابع آب است. در مقایسه با ساخت سد، استفاده از آبهای زیرزمینی دارای مزایایی میباشد. معمولاً، هزینه کمتر، کاهش تبخیر و رسوب گذاری، کاهش مشکلات کیفی آب و کاهش مشکلات اجتماعی و فرهنگی برخی از این مزایا میباشند. به منظور کاهش مشکلات اساسی مخازن سطحی بزرگ، سیستم ذخیره سیکلی به عنوان یک انتخاب میتواند مورد استفاده قرار گیرد. سیستم ذخیره سیکلی، سیستمی ترکیبی است، متشکل از دو زیر سیستم آب سطحی (شامل مخزن سطحی و رودخانه) و آب زیرزمینی (مخزن زیرزمینی یا آبخوان)که همراه با تغذیه مصنوعی قادر به تأمین نیاز منطقه با قابلیت اعتماد نسبتاً بالایی میباشد. به منظور بهینهسازی در این سیستمها، روابط هیدرولیکی بین تمام اجزای سیستم باید در نظر گرفته شود که متأسفانه در بسیاری از مطالعات از آن صرفنظر میشود. در این تحقیق مدلی جهت طراحی و بهرهبرداری به همراه فرمان بهرهبرداری بهینه با رویکرد تودهای تهیه شده است. مدل بهینهسازی حاصل به شکل یک مدل غیرخطی است. به منظور ارزیابی مدل، نتایج حاصل از این مدل با نتایج حل مدل با رویکرد توزیعی مقایسه شده است و بدین ترتیب کارآیی مدلهای تودهای در حل مسائل سیستمهای ذخیره سیکلی مورد بررسی قرار گرفته است. مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101A Conflict Resolution Model for Water Allocation and River Water Quality Managementمدل حل اختلاف مدیریت کیفی و تخصیص آب از رودخانه کرخه55642249FAعلی مریدیکاندید دریافت درجه دکتری مهندسی عمران، دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیرمحمد کارآموزاستاد دانشکده عمران، دانشگاه تهرانJournal Article20060526In this study, a conflict resolution methodology for water quality management in a river system is presented. The proposed model maximizes an objective function based on the Nash product which includes different utility functions related to the water quality deviations from the standard limits. Simulation and optimization models are proposed to determine operating policies for river water quality management, based on evaluation of system performance to derive the most appropriate diffusing strategy for different stakeholders. The proposed model includes an integrated GA–based optimization and a water quality simulation model. Sustainability measures of system performance, termed "reliability, resiliency, and vulnerability", are calculated for each water withdrawal sector and combined into a Nash product as an objective function. The model is applied to the Karkheh River system in the southern part of Iran. The utility functions are based on the acceptable risk of the allocated water quality by different sectors, especially by the Environmental Protection Organization. The results of the proposed model show that the waste load allocation policies can significantly reduce the number and duration of deviations from the standard quality limitsدر این پژوهش، یک مدل حل اختلاف به منظور مدیریت کیفی رودخانه و تعیین بارآلودگی مجاز آلایندههای ورودی به رودخانه با هدف افزایش اطمینانپذیری سیستم در تأمین نیاز مصرفکنندگان با کیفیت مطلوب، تدوین شده است. در این روش تابع حل اختلاف نش به عنوان تابع هدف مدل انتخاب شده که در آن اهداف و مطلوبیتهای تأثیرپذیران و تصمیمگیران سیستم در قالب توابع مطلوبیت آنها در نظر گرفته شده است و میتواند مبنایی برای حل اختلاف بین شرکتکنندگان مختلف باشد. به منظور تعیین تغییرات مکانی و زمانی غلظت کل جامدات محلول که به عنوان متغیر کیفی شاخص در این پژوهش در نظر گرفته شده، از یک مدل شبیهسازی کیفی رودخانه استفاده شده است. به منظور تعیین سهم بهینه برداشت آب و تخلیه فاضلاب و زهآب شهرها، صنایع و زمینهای کشاورزی اطراف رودخانه، مدل شبیهسازی کیفی رودخانه با مدل بهینهسازی با تابع هدف حل اختلاف نش تلفیق شده است. کارآیی این مدل با استفاده از اطلاعات کمّی و کیفی موجود در سیستم رودخانهای کرخه واقع در جنوب غرب ایران از محل سد کرخه تا هورالعظیم ارزیابی شده است. نتایج نشان میدهند که این مدل با بهینهسازی میزان بار آلودگی ورودی به رودخانه میتواند به طور کاملاً مؤثر مطلوبیتهای شرکت کنندگان را برآورده ساخته و به طور قابل توجهی تعداد و زمان تخلفات از حدود استانداردهای کیفی را در طول رودخانه کاهش داده و اطمینانپذیری تأمین نیاز با کیفیت مطلوب را افزایش دهد.مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101Municipal Wastewater Effluent Effects on Intertidal Zone Gastropod Communities of Boushehr City Coastal Areaبررسی اثر فاضلابهای شهری بر تنوع گونهای و پراکنش شکم پایان منطقه بین جزر و مدی سواحل شهر بوشهر65762250FAامیر وزیریزادهمربی دانشگاه خلیج فارسسید عبدالمجید حسینیکارشناس آزمایشگاه مرکز مطالعات و پژوهشهای خلیج فارسJournal Article20060514In order to investigate the effects of Boushehr municipal wastewater on the structural diversity and dominance of Gastropods' colonies in intertidal zones, to understand the species of the biological indices, and finally to assess the impacts of the sewage, samples were taken from 7 stations affected by the sewage and from one station without any sewage pollutants (reference station), from March 2002 to February 2003. For the purposes of this study, 1056 benthos were collected, separated, fixed, and then identified. Samples were taken using a 50×50 cm quadrate, a scraper in rocky beds, and a core sampler in sandy beaches to a depth of 5 cm. In this study, 25 species relating to 16 families of gastropods were identified. An important finding was that the species <em>Planaxis sulcatus</em> and <em>Cerithidea cingulata</em> were identified as the biological indices of the polluted areas. The results of this study revealed high pollution in these coasts due to organic materials resulting from the sewage disposal.به منظور بررسی تأثیر فاضلابهای شهری منطقه بوشهر بر تنوع و غالبیت ساختار اجتماعات شکم پایان منطقه بین جزر و مدی و شناخت گونههای شاخص بیولوژیکی و نهایتاً ارزیابی اثرات این فاضلابها، طی بهار 1381 لغایت زمستان همان سال، از هفت ایستگاه تحت ریزش فاضلاب شهری و یک ایستگاه فاقد آلودگی فاضلاب (شاهد)، مجموعاً 1056 نمونه کفزی جمعآوری و پس از جداسازی و تثبیت، شناسایی گردیدند. نمونهبرداری در بخشهای صخرهای با استفاده از کوادرات50×50 سانتیمتر و کاردک فلزی و در سواحل ماسهای با استفاده از یک نمونهبردار مغزهگیر تا عمق 5 سانتیمتر صورت گرفت. در این بررسی مجموعاً25 گونه متعلق به 16 خانواده از شکم پایان مورد شناسایی قرار گرفتند. از یافتههای بسیار مهم این بررسی، معرفی گونههای <em>Planaxis sulcatus</em> و <em>Cerithidea cingulata</em> به عنوان شاخص بیولوژیکی مناطق آلوده میباشد. نتایج حاصله از این بررسی حاکی از آلودگی بسیار بالای سواحل مورد بررسی به مواد آلی ناشی از فاضلاب است.مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101Investigating the Effect of Land Subsidence Due to Groundwater Discharges on Well Casing Damageبررسی تأثیر نشست حاصل از تخلیه آب زیرزمینی بر تخریب لوله جدار77882252FAرضا آل خمیسکارشناس ارشد مکانیک سنگسعید کریمی نسباستادیار بخش مهندسی معدن دانشگاه شهید باهنر کرمانفرزاد آریانادانشیار فقید بخش مهندسی مکانیک دانشگاه شهید باهنر کرمانJournal Article20060608Subsidence is a geologically hazardous phenomenon that can be aggravated by human such activities as long term water, oil, and gas extraction from underground resources or other mining activities. Abstractions from aquifers cause the aquifer-maintaining forces to lose their state of equilibrium whereby land starts to settle and ultimately subsides. One of the consequences of exploiting groundwater is the rising of well casings. Actually, it is not the well casings that rise but the ground around them that subsides. Subsiding forces can damage well casings and this can foist repair costs, or the wells might even need to be replaced by new ones. In this paper ,finite element methods in two and three dimensional modes as well as ABAQUS software were used to investigate the impacts of subsidence from groundwater exploitation and drawdown on well casings. This investigation was based on data obtained from a real basin. The results obtained through geomechanical simulations using ABAQUS software have shown that the mechanism by which subsidence "bowls" are created cause two forms of rupture in the casings. At the edges of the bowl, surface sediments might slide on soft clay toward the center of the well and cause the casings to bend along their way. Around the center of the bowl something different happens. Considerable compaction of soft clay over time causes the distance between the surface and the bottom of the well to decrease, which results in the buckling of the casings and, in some cases, causes the casings to stick out of the ground.نشست یکی از پدیدههای مخاطره آمیز زمینشناسی میباشد که در اثر فعالیتهای بشری همچون تخلیه دراز مدت آب، نفت و گاز از مخازن زیرزمینی و یا استخراج از معادن زیرزمینی میتواند تشدید شود. هنگامی که سفره آبدار تحت بهره برداری قرار میگیرد، نیروهای متعادل کننده سفره آبدار در اثر تخلیه آب زیرزمینی دچار تغییر میگردند، و زمین نشست میکند و سرانجام فرو نشست رخ میدهد. یکی از عواقب نشست ناشی از بهرهبرداری آبهای زیرزمینی، رشد لوله جدار چاه آب میباشد. البته این لوله جدار نیست که رشد میکند بلکه زمین اطراف لوله جدار است که به سمت پایین میرود. نیروهای ناشی از نشست همچنین میتواند باعث تخریب لوله جدار چاه گردد که این موضوع باعث تحمیل هزینههای تعمیر و یا حتی جایگزینی چاه میگردد. در این مقاله توسط روش عددی المان محدود در حالتهای دو و سه بُعدی و با استفاده از نرمافزار ABAQUS به بررسی تأثیر نشست حاصل از بهرهبرداری آبهای زیرزمینی و افت سطح آبهای زیرزمینی بر لوله جدار چاههای آب با استفاده از اطلاعات یک حوزه آبریز پرداخته شد. نتایج حاصل از شبیه سازیهای ژئومکانیکی به کمک نرمافزار ABAQUS نشان داد که مکانیسم ایجاد"کاسه" فرونشست باعث پدید آمدن دو حالت گسیختگی لوله جدار میگردد. در یال این گودال رسوبات سطحی میتوانند به سمت مرکز گودال، بر روی رسهای نرم بلغزند و در مسیر حرکت خود باعث خمش در لوله جدار شوند. در نزدیکی مرکز گودال فرونشست، مشکل از گونه دیگری است. تراکم قابل ملاحظه رسهای نرم با گذشت زمان، باعث کوتاه شدگی فاصله سطح زمین تا کف چاه میگردد. همان گونه که انتظار میرود در این وضعیت لوله جدار دچار کمانش میشود و در بعضی موارد، لولههای جدار از زمین بیرون میزنند.مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593617420070101Application of MIKE21 Software in Flood Routing of Tidal Rivers: A Case Study of the Zohre Riverکاربرد نرمافزار MIKE21 در روندیابی جریان رودخانه جزر و مدی زهره89962255FAعلی کرمی خانیکیعضو هیئت علمی مرکز تحقیقات حفاظت خاک و آبخیزداریمسعود گودرزیعضو هیئت علمی مرکز تحقیقات حفاظت خاک و آبخیزداریمرتضی دهقانیکارشناس ارشد آبخیزداری و مدیر آبخیزداری استان خراسان جنوبیسید فرهاد موسویاستاد گروه آب، دانشکده کشاورزی، دانشگاه صنعتی اصفهانJournal Article20060514Flood routing is of special importance from different aspects of river engineering such as flood zoning, flood forecasting, etc. There are two methods employed in river flood routing, hydraulic and hydrological. Hydrological methods are used when the river is at low tide and, hence, cannot be employed to analyze floods caused by the tide. Hydraulic methods must be employed in tidal rivers when the direction of the current reverses at high tide. In this research,MIKE21 modeling software was used for the flood routing of the Zohreh tidal river. The model was calibrated by surveying the river, taking samples form the river bed, measuring sea water level and the velocity of the river flow. Analyzing the sensitivity of the model showed that the coefficient of determination, root mean square error and relative error were 0.95, 0.032, and 0.27, respectively, all indicating the efficacy of the model in simulating different parameters such as velocity, flow rate, and water surface profile. The flood routing results of the tidal currents showed that the hydrograph of the influent and effluent to the reach at high tide (when the current direction is from sea to the river) was similar to the normal flood routing of the river, but at low tide (when the current direction is from the sea to the river) influent and effluent hydrograph would not follow the laws of normal flood routing.
روندیابی سیل در رودخانهها و مسیلها از جنبههای مختلف مهندسی رودخانه نظیر پهنهبندی سیل، پیشبینی سیل و غیره از اهمیت خاصی برخوردار است. روندیابی سیل در رودخانه به دو روش هیدرولوژیکی و هیدرولیکی انجام میشوند. روشهای هیدرولوژیکی برای شرایط معمولی رودخانه کاربرد داشته و قادر به تحلیل سیلهای ناشی از جزر و مد در رودخانه نمیباشند. برای رودخانههای جزر و مدی که جهت جریان در شرایط مد دریا معکوس میگردد، باید از روشهای هیدرولیکی استفاده گردد. در این تحقیق مدل Mike21 برای روندیابی سیلهای جزر و مدی رودخانه زهره مورد استفاده قرار گرفته است. واسنجی مدل به وسیله نقشهبرداری از کانال رودخانه، نمونهبرداری از بستر، اندازهگیری تراز سطح آب دریا و اندازهگیری سرعت در مقطع رودخانه انجام گرفت. تحلیل حساسیت مدل نشان داد که ضریب تعیین، جذر میانگین مربع خطا و خطای نسبی به ترتیب برابر 0/95 ،0/032و 0/27 درصد است که نشان دهنده کارآیی خوب مدل برای شبیهسازی پارامترهای مختلف جریان از جمله سرعت، دبی و پروفیل سطح آب میباشد. نتایج روندیابی جریانهای جزر و مدی نشان میدهد که تغییرات هیدروگراف ورودی و خروجی به بازه در هنگام مَد که جهت جریان به سمت رودخانه است، مشابه روندیابی معمولی رودخانه است؛ ولی در حالت جزر دریا که جهت جریان از رودخانه به دریاست، هیدروگرافهای ورودی و خروجی از قوانین روندیابی جریان در رودخانههای معمولی تبعیت نمیکند.